KAYA Vision > Products > Iron 2020BSI Camera Link High Speed Compatible

Iron 2020BSI Camera Link High Speed Compatible

4 MP at 74 fps Rolling Shutter sensor. Small Form Factor 10Gbps ruggedized camera

Features

Innovative Approach – The Iron 2020BSI Camera Link High Speed Compatible is a low-cost, low-power rolling shutter CMOS camera, with Camera Link High Speed compatible interface which supports 4MP high quality video at rates up to 135fps.

Intelligent Design – Our camera incorporates GPIXEL’s GSENSE2020BSI rolling shutter sensor with a 6.5μm pixel size. With a compact outline and low-key design, the Iron can be fitted into tight spaces. Superior sensor performance allows very low light vision capabilities.

Ordering Codes:

Iron2020BSIM-CLHS-SC

4 Megapixel up to 135 fps
Up to 4.5W power at full rate
Full image processing feature set
10 Gbps Camera Link High Speed Compatible fiber optic interface
C mount / CS mount
Full EMVA1288 report
Full built-in self-test (BIT)
Full built-in voltage testing

Applications

Perimeter vision
Low light surveillance
Special Effects
VR

Specifications

Specifications

Pixel Size	6.5 µm x 6.5 µm
Resolution	2048 (H) x 2048 (V)
Sensor Size	13.3 mm x 13.3 mm \| 1.2”
Sensor	Gpixel GSENSE2020BSI
Output	Camera Link High Speed Compatible
Digitization	11 bit, 12 bit
Interface connector	Fiber optic SFP+ module
Electronic Shutter	Rolling shutter with global reset
Shutter Speed	4.62 μs @11-bit resolution in 6.6 μs steps (up to 16 sec)
	8.04 μs @12-bit resolution in 11.2 μs steps (up to 16 sec)
Exposure Control	Off / Internal / External / Auto
Image acquisition	Continuous / Triggered
Trigger Input	External / Pulse generator / Software / Computer (12 μs latency, 8 ns jitter)
Triger Mode	Free run / External / Internal
Trigger Options	Edge / De-bounce
Output resolution	16bits HDR in API or 12bit
Electronic shutter	Rolling shutter with global reset
Frame rate	74 fps @ 11-bit HDR mode
	43 fps @ 12-bit HDR, CMS and Global reset modes
	135 fps @11-bit high speed mode
Subsampling	1 x 2 / 2 x 1 / 2 x 2 (user configurable)
Monochrome/ color	Monochrome
Full well charge	54 ke-
Dynamic range	88dB ± 15%
Read Out Noise	1.9 RMS ± 15%
Dark Current	42 e- pxl/sec @ 21 °C
Signal-to-Noise Ratio (SNR max)	46 dB
Quantum efficiency (QE) X FF	<95% @550 nm
On camera processing	Defect pixel correction
	ROI
	Frame counter
	Flat field / Fixed patter noise correction
	Auto/Manual black level
	Auto Exposure/Gain
	Auto/Manual White balance
	Image flip
	LUT
	Gain (Analog / Digital)
	Binning
	Operational Time Counter
GPIO connection	Two inputs, two outputs, external trigger & strobe controller

Mechanical & Electrical

Dimensions ^[¹^]	46 mm x 48 mm x 102 mm
Weight (without lens)	~233g
Typical current	400mA @ 12V
Operating Temperature	-40°C to 70C, 10-90% humidity (non-condensing)
Storage Temperature	-40°C to 85°C, 10-90% humidity (non-condensing)
Operational Shock	Tested per MIL-STD-810G Method 516.6, 3-axis Shock 75G
Operational Vibration	Tested per MIL-STD-810G Method 514.6, 3-axis Vibration Category 20
Ingress Protection	Optional IP67 (with protective lens tube)
Lens Mount	C-mount / CS-mount
Power Input	PoCXP full support (11-28V with external power option)
Power Consumption	<5W @ 12V DC