Iron 0505 NIR

Features

Innovative Approach – The Iron 0505 NIR is a high speed, low-cost, low-power global shutter CMOS camera with IR-enhanced (NIR) sensitivity and up to 50 Gbps CoaXPress v2.1 interface (Micro-BNC connector) which supports 26.2 MP high quality video at rates of up to 150fps.

Intelligent Design – Our camera incorporates Gpixel’s GMAX0505RF sensor – manufactured in Israel by the company’s Belgian branch. The GMAX0505RF is a global shutter, IR-enhanced (NIR) sensor with a 2.5µm pixel size. With a compact outline the camera can be fitted into tight spaces. Superior sensor performance with enhanced near-infrared (NIR) response allows very low light vision capabilities.

The CoaXPress interface allows high-speed data transmission for digital imaging in machine vision applications, faster than other standards, such as Camera Link or GigE Vision. Our CoaXPress Iron robust cameras are ideally suited for industrial and aerospace machine vision systems. With dimensions of 44 x 44 x 39 mm, The Iron 0505 NIR CoaXPress ruggedized camera is designed to fit very small places. The wide range of operating temperatures, spanning from -40°C to 80°C, enables it to function under severe environmental conditions. The high resolution of 5120 x 5120 provides a sensitive high-quality video output at a high speed that would meet almost any need.

Ordering codes:

Iron0505RFHSZ-SC

26.2 Megapixel up to 150 fps
IR Enhanced (Red Fox / NIR) sensor
Up to 11W power at full rate
Full image processing feature set
Up to 50 Gbps CoaXPress interface
C mount available
Full EMVA1288 report
Full built-in self-test (BIT)
Full built-in voltage testing
Customization as per user requirements
Wide temperature range
Vibration resistant

Applications

Perimeter vision
Low light surveillance
Special Effects
VR
3D

Specifications

General
Pixel Size	2.5 µm x 2.5 µm
Resolution	5120 (H) x 5120 (V)
Sensor Size	18.1 mm diagonal
Sensor Format	1.1”
Sensor	Gpixel GMAX0505RF
Sensor Type	CMOS
Output Interface	CoaXPress v2.1
Supported Interface rates	CXP-12, CXP-6 or CXP-3
Interface Connector	Micro-BNC
Number of Connectors	High Speed Version : 4 Normal Speed Version : 2
Output Resolution	8, 10 or 12 bit
Maximum Frame Rate	High Speed Version: 150 fps @8 bit, 145 fps @10 bit Normal Speed Version: 41 fps @8, 10 and 12 bit
Tap Geometry	1X-1Y
Image Acquisition	Continuous / Triggered
Camera Control	Gen<i>Cam
Electronic Shutter	Global
Monochrome / Color	Red Fox (NIR / IR Enhanced)
Temporal Noise	<1.6 e- at 25°C
Full Well Charge	6700 e-
Dynamic Range	>65 dB at 520 nm
Signal-to-Noise Ratio (SNR max)	38.1 dB at 520 nm
Quantum Efficiency (QE)	>65.5% at 520 nm
Shortest Exposure	2.5 µs
IR Filter (optional)	UV cut below 400 nm IR cut above 700 nm
Exposure control	Automatic/Manual
Gain control	Automatic/Manual
Color Control	RGB offsets Auto / Manual White balance LUT
Image enhancement	Defect pixel correction Gain (Analog / Digital) Auto / Manual black level Binning Auto Exposure / Gain Flat field / Fixed pattern noise correction
Additional on camera processing	ROI Image flip Frame counter Operational Time Counter Binning
Power Input	PoCXP External 11 V – 28 V input
Power Consumption	<11 W at 24 V DC
Configuration software	Gen<i>Cam Standard software
Synchronization	Protocol/External I/O Trigger
Exposure Strobe output	Yes
General Purpose Inputs and Outputs
I/O lines	2 singled-ended TTL output 2 singled-ended TTL/LVTTL input
Usage	Any System I/O input lines can be connected to any I/O output line Any I/O input line can generate any trigger event Any I/O input line can trigger a timer Any I/O input line can trigger a counter
Electrical specifications	TTL lines: 5 V TTL compliant LVTTL lines: 3.3 V LVTTL compliant Isolated lines: opto-isolated lines with voltage range up to 30 V
Absolute Maximum	TTL/LVTTL input voltage: -0.3 V to +6 V TTL output current: 40 mA Isolated input voltage: -4 V to +25 V Isolated output voltage: -0.3 V to +25 V Isolated input current: 30 mA Isolated output current: 50 mA
Operating	TTL/LVTTL input voltage: 0 V to +5 V TTL output current: 0mA to 24 mA Isolated input voltage: 0 V to +24 V Isolated output voltage: 0 V to +24 V Isolated input current: 6.3 mA to 15 mA Isolated output current: 1 mA to 25 mA
Timers	4 general purpose timers Configurable delay and duration 32-bit accumulator
Counters	4 general purpose counters Configurable value and duration 32-bit counter
Mechanical
Dimensions (including lens mount)	44 mm x 44 mm x 39 mm (1.7” x 1.7” x 1.5”)
Weight (without lens)	100 g (3.5 oz)
Lens Mount	C
Sensor Alignment	Active
Ingress Protection	Optional IP67 (with protective lens tube)
Environmental Conditions
Operating ambient air temperature	Commercial : 0°C to +50°C ( 32°F to +122°F) Industrial : -40.0°C to +80°C ( -40°F to +176°F) At 1 m/s airflow
Operating ambient air humidity	10% to 90% RH non-condensing
Storage ambient air temperature	Commercial : 0°C to +55°C ( 32°F to +131°F) Industrial : -40.0°C to +85°C ( -40°F to +185°F)
Storage ambient air humidity	10% to 90% RH non-condensing
Operational Shock	Tested per MIL-STD-810G Method 516.6, 3-axis Shock 75G
Operational Vibration	Tested per MIL-STD-810G Method 514.6, 3-axis Vibration Category 20
MTBF	2,100,000 hrs @ 50C (Telecordia)
Certifications
Electromagnetic – EMC standards	The European EMC Directive 2014/30/EU The Unites States FCC rule 47 CFR 15
EMC – Emission	EN 55032:2015 Class B FCC 47 Part 15 Class B
EMC – Immunity	EN 55035:2017 Class B EN 61000-4-3 EN 61000-4-4 EN 61000-4-6
Flammability	PCB compliant with UL 94 V-0
RoHS	Compliant with the European Union Directive 2011/65/EU (RoHS2)
REACH	Compliant with the European Union Regulation No 1907/2006
WEEE	Must be disposed of separately from normal household waste and must be recycled according to local regulations

* For accurate and up-to-date information, please refer to the datasheet. KAYA Vision reserves the right to update datasheets from time to time without prior notice.