Iron 927
104.9 Megapixel, Global shutter, Small, Rugged, Low Power with Large Feature Set
Features
KAYA Vision is a global leader in commercial, industrial and rugged cameras and imaging system solutions, providing high-performance products for over 15 years. Founded in 2010 by industry experts, KAYA Vision designs, manufactures and supports both COTS and custom products for high-performance imaging needs. KAYA Vision cameras leverage cutting-edge technology to provide exceptional image quality in the smallest form factors. Our advanced camera lineup features built-in image pre-processing, enhancement, and correction, all while maintaining industry-leading power efficiency. Designed for reliability, our SWaP-C (Size, Weight, Power, and Cost) optimized cameras offer the highest durability, operating in extreme environments with the widest temperature ranges, superior shock and vibration resistance, and extended MTBF. KAYA Vision cameras are the ultimate choice for high-performance imaging systems across commercial, industrial, medical, defense aerospace, and scientific applications.
Key Features:
• 104.9 Megapixel up to 46.0 fps
• Monochrome and Color sensor variation
• Up to 14 W power at full rate
• Full image processing feature set
• CoaXPress v2.1 standard compliant
• Gen<i>Cam compliant
• Up to 4 CoaXPress links
• F, M42, EF or Active EF lens mount available
• Commercial and Industrial grade options
• Full EMVA1288 report
• Full built-in self-test (BIT)
• Full built-in voltage testing
• Customization as per user requirements
Applications:
• Perimeter vision
• Low light surveillance
• Special Effects
• Virtual Reality
• 3D
Specifications
| General | |
|---|---|
| Pixel Size | 2.74 µm x 2.74 µm |
| Resolution | 10240 (H) x 10240 (V) |
| Sensor Size | 39.7 mm diagonal |
| Sensor Format | 35 mm |
| Sensor | Sony IMX927 |
| Sensor Type | CMOS |
| Output Interface | CoaXPress v2.1 |
| Supported Interface rates | CXP-12, CXP-6 or CXP-3 |
| Interface Connector | Micro-BNC |
| Number of Connectors | 4 |
| Output Resolution | 8, 10 or 12 bit |
| Maximum Frame Rate | 46 fps @8 bit, 37 fps @10 bit, 31 fps @12 bit |
| Tap Geometry | 1X-1Y |
| Image Acquisition | Continuous / Triggered |
| Camera Control | GenCam |
| Electronic Shutter | Global |
| Monochrome / Color | Monochrome or Color |
| Temporal Noise | <2.7 e- at 25°C |
| Full Well Charge | 9825 e |
| Dynamic Range | >70.8 dB at 520 nm |
| Signal-to-Noise Ratio | 40 dB at 520 nm |
| Quantum Efficiency | >63% at 520 nm |
| Shortest Exposure | 10 µs |
| IR Filter (optional) | UV cut below 400 nm; IR cut above 700 nm |
| Exposure control | Automatic/Manual |
| Gain control | Automatic/Manual |
| Color Control | RGB offsets; Auto/Manual White balance; LUT |
| Image enhancement | Defect pixel correction; Gain; Auto/Manual black level; Binning; Auto Exposure/Gain; Flat field / Fixed pattern noise correction |
| Additional on camera processing | ROI; Image flip; Frame counter; Operational Time Counter; Binning |
| Power Input | PoCXP; External 11 V – 28 V input |
| Power Consumption | <14 W at 24 V DC |
| Configuration software | GenCam Standard software |
| Synchronization Protocol/External I/O | Trigger |
| Exposure Strobe output | Yes |
| General Purpose Inputs and Outputs | |
| I/O lines | 1 opto-isolated input; 1 opto-isolated output; 1 singled-ended TTL output; 1 singled-ended TTL/LVTTL input |
| Usage | Any I/O input line can generate any trigger event, timer, or counter; any System I/O input lines can connect to any I/O output line |
| Electrical specifications | TTL: 5 V; LVTTL: 3.3 V; Isolated: up to 30 V |
| Absolute Maximum | TTL/LVTTL input: -0.3–+6 V; TTL output current: 40 mA; Isolated input: -4–+25 V; Isolated output: -0.3–+25 V |
| Operating | TTL/LVTTL input: 0–5 V; TTL output: 0–24 mA; Isolated input: 0–24 V; Isolated output: 0–24 V |
| Timers | 4 general purpose, configurable delay/duration, 32-bit accumulator |
| Counters | 4 general purpose, configurable value/duration, 32-bit counter |
| Mechanical | |
| Dimensions | 83 mm x 78 mm x 49 mm (3.3” x 3.1” x 1.9”) |
| Weight | 500 g (17.6 oz) |
| Lens Mount | F, M42, EF or Active EF |
| Sensor Alignment | Active |
| Ingress Protection | Optional IP67 (with protective lens tube) |
| Environmental Conditions | |
| Operating ambient air temperature | Commercial: 0°C to +50°C; Industrial: -40°C to +70°C |
| Operating ambient air humidity | 10% to 90% RH non-condensing |
| Storage ambient air temperature | Commercial: 0°C to +55°C; Industrial: -40°C to +75°C |
| Storage ambient air humidity | 10% to 90% RH non-condensing |
| Operational Shock | MIL-STD-810G, Method 516.6, 75G |
| Operational Vibration | MIL-STD-810G, Method 514.6, Category 20 |
| MTBF | 1,600,000 hrs @ 50°C (Without fan) |
| Certifications | |
| Electromagnetic – EMC standards | EU EMC Directive 2014/30/EU; US FCC 47 CFR 15 |
| EMC – Emission | EN 55032:2015 Class B; FCC 47 Part 15 Class B |
| EMC – Immunity | EN 55035:2017 Class B; EN 61000-4-3/4/6 |
| Flammability | PCB UL 94 V-0 |
| RoHS | Compliant with EU Directive 2011/65/EU (RoHS2) |
| REACH | Compliant with EU Regulation No 1907/2006 |
| WEEE | Must be recycled per local regulations |
Camera Workflow
Iron CoaXPress camera work flow with Frame Grabber
*KAYA’s Vision Point software and SDK are highly recommended. For more information please click here.
QE Tables
IMX927 Spectral Response
Downloads
Related
Iron 4521
The Iron4521 CoaXPress is a low-cost, low-power, high-resolution global CMOS camera with up to 50 Gbps CoaXPress v2.0 interface (Micro-BNC connector) which supports 21 MP high-quality video at rates of up to 232 fps.
Iron 4510
The Iron4510 CoaXPress is a low-cost, low-power, high-resolution global CMOS camera with up to 50 Gbps CoaXPress v2.0 interface (Micro-BNC connector) which supports 10 MP high-quality video at rates of up to 487 fps.