Iron 2020BSI

Features

4 Megapixel up to 74 fps
Up to 4W power at full rate
Full image processing feature set
Up to 12.5 Gbps CoaXPress interface
C / CS / EF or DC Auto Iris mounts
Full EMVA1288 report
Full built-in self-test (BIT)
Full built-in voltage testing
Customization as per user requirements
Wide temperature range
Vibration resistant

Perimeter vision
3D
Low light surveillance
Special Effects
VR
UV

Innovative Approach – The Iron 2020BSI is a high speed, low-cost, low-power rolling shutter CMOS camera with up to 12.5 Gbps CoaXPress v2.0 interface (Micro-BNC connector) which supports 4 MP high quality video at rates of up to 74fps.

Intelligent Design – Our camera incorporates Gpixel’s GSENSE2020BSI super sensitive sensor – a rolling shutter sensor with a 6.5µm pixel size. With a compact outline the camera can be fitted into tight spaces. Superior sensor performance allows very low light vision capabilities and compatible with UV applications.

Specifications

Pixel Size	6.5 µm x 6.5 µm
Resolution	2048 (H) x 2048 (V)
Sensor Size	13.3 mm x 13.3 mm \| 1.2”
Sensor	Gpixel GSENSE2020BSI
Video output	CoaXPress v2.0 up to 12.5 Gbps (CXP3, CXP6, CXP12)
Interface Connector	Micro-BNC
Digitization	Dual 11 bit, Dual 12 bit
Electronic shutter	Rolling shutter with global reset
Shutter speed	4.62 µs @11-bit resolution in 6.6 µs steps (up to 16 sec)
	8.04 µs @12-bit resolution in 11.2 µs steps (up to 16 sec)
Exposure control	Off / Internal / Auto
Image acquisition	Continuous / Triggered
Trigger input	Pulse generator / Software (12 µs latency, 8 ns jitter)
Trigger mode	Free run / Internal
Trigger options	Edge
Output resolution	16bits HDR in API or 24bit RAW (2x 11 or 12 bit ADC)
Frame rate	74 fps @ 11 bit
	43 fps @ 12 bit
Subsampling	1 x 2 / 2 x 1 / 2 x 2 (user configurable)
Monochrome/color	Monochrome
Full well charge	54 ke-
Dynamic range	88dB
Dark current	42 e- pxl/sec @ 21 °C
Signal-to-Noise Ratio (SNR max)	46 dB
Quantum efficiency (QE) X FF	<95% @550 nm
Temporal noise	1.9 e- or 1.4 e- with reduced dynamic range
Latency	< 100 µs (on top of exposure time)
Communication latency	Gen<i>Cam – ~5 ms
	Direct camera access – ~0.5 ms
Regulation	FCC Part 15 Class A, CE, RoHs2 (official certification optional)
On camera processing	Defect pixel correction
	Auto/Manual White balance
	ROI
	Image flip
	Frame counter
	Flat field / Fixed patter noise correction
	LUT
	Gain (Analog / Digital) – manual / auto
	Auto/Manual black level
	Digital binning (2 x 2)
	Auto Exposure/Gain
	Operational Time Counter
Pulse generator	Yes, Programmable at 8 ns increments
Additional features	Over/under voltage protection
	Correlated double sampling support
	Per frame ROI change
	Global reset
	Multi ROI Support (vertical only. Horizontal at full resolution)
	Reverse voltage polarity protection
	Frame-by-frame shutter speed change
	Three points of temperature sensing
	Per-pixel FPN (optional)
GPIO connection	Two inputs, two outputs, external trigger & strobe controller

Mechanical & Electrical

Dimensions (including lens mount)	44 mm x 44 mm x 46 mm (1.7” x 1.7” x 1.8”)
Lens Mount	C-mount, CS-mount, EF-mount or DC Auto Iris lenses
Weight (without lens)	136g
Typical current	170mA @ 24V
Power Consumption	<4W @ 24V DC
Mount	Front mount
Heat dissipation	Front heat dissipation
Sensor Mechanical Positioning	≤ 0.15°
Operating temperature	-40°C to 85°C, 10-90% humidity (non-condensing)
Storage temperature	-40°C to 90°C, 10-90% humidity (non-condensing)
Shock/Vibration	MIL 810F