KAYA Vision > Products > Iron CoF 253

Iron CoF 253

12 MP at 64 fps Global Shutter sensor. Small Form Factor CoaXPress Over Fiber ruggedized camera

Features

Innovative Approach – Iron CoF 253 is a compact low-cost, low-power global shutter CMOS camera with a CoaXPress Over Fiber interface which supports 12.29 MP high quality video at rates up to 63.8 fps.

Intelligent Design – This Iron camera incorporates Sony Pregius IMX253 global shutter sensor with 3.45µm pixel size. With a compact outline and low power design this camera can be fitted into tight spaces. Superior sensor performance allows very low light vision capabilities.

12.29 Megapixel up to 63.8 fps
Monochrome and Color models
Up to 4.5W power at full rate
Full image processing feature set
CoaXPress Over Fiber
C mount / CS mount
Full EMVA1288 report
Full built-in self-test (BIT)
Full built-in voltage testing
Customization as per user requirements
Wide temperature range
Vibration resistant

Applications

Perimeter vision
3D
Low light surveillance
Special Effects
VR

Specifications

Specifications

Pixel Size	3.45 µm x 3.45 µm
Resolution	4096 (H) x 3000 (V)
Sensor Size	17.5 mm diagonal
Sensor	Sony Pregius IMX253 CMOS sensor
Output Interface	CoaXPress Over Fiber
Interface Connector	Fiber optic SFP+ module
Output Resolution	8, 10 or 12 bit
Max Frame Rate	63.8 fps @8 bit resolution
	63.8 fps @10 bit resolution
	45.5 fps @12 bit resolution
Image Acquisition	Continuous / Triggered
Camera Control	Gen<i>Cam
Electronic Shutter	Global shutter
Monochrome / Color	Monochrome / Color
Temporal Noise	< 2.2 e- @25°C
Full Well Charge	9828 e-
Dynamic Range	> 70.8dB @520nm
Signal-to-Noise Ratio (SNR max)	40 dB @520nm
Quantum Efficiency (QE) X FF	> 63% @525nm
Shortest Exposure	10 µs
On Camera Processing	Defect pixel correction
	Auto/Manual White balance
	ROI
	Image flip
	Frame counter
	LUT
	Flat field / Fixed patter noise correction
	Gain (Analog / Digital)
	Auto/Manual black level
	Binning
	Auto Exposure/Gain
	Operational Time Counter
GPIO Connection	Two inputs, two outputs, external trigger & strobe controller

Mechanical & Electrical

Dimensions (including lens mount)	45.8 mm x 45.8 mm x 86.8 mm (Height x Width x Depth)
Lens Mount	C-mount, CS-mount, EF-mount or DC Auto Iris lenses
Weight (without lens)	<180g
Power Input	12V (optional 5 – 36V)
Power Consumption	<4.5W @ 12V DC
Operating Temperature	-40°C to 80°C, 20-85% humidity (non-condensing)
Storage Temperature	-40°C to 85°C, 10-90% humidity (non-condensing)
Ingress Protection	Optional IP67 (with protective lens tube)
Operational Shock	Tested per MIL-STD-810G Method 516.6, 3-axis Shock 75G
Operational Vibration	Tested per MIL-STD-810G Method 514.6, 3-axis Vibration Category 20